Preset Commands for CSJ WiFi series camera

Preset Commands for CSJ series camera


1. preset position setting and calling


Preset position setting: 

Press the number keys at the preset point to input the corresponding value (preset position effective value 1-128), and then press the preset position setting, the corresponding preset position setting is successful. For example: press the number 1, then press the number 6, the number displays 16, and then press the preset setting, the preset 16 is set successfully.


Preset position calling:

Press the number keys at the preset point to enter the corresponding value (preset  value 1-128), then press the call button, the corresponding preset position is set successfully. 

For example: press the number 1, then press the number 6, the number displays 16, and then press the call button, the preset 16 is successfully called.


Preset delete:

Press the number keys at the preset point to enter the corresponding value (preset rms value 1-128), then press the delete preset position setting, the corresponding preset position is set successfully. 

For example: press the number 1, then press the number 6, the number displays 16, and then press the preset to delete, preset 16 calls delete.



2.Cruise Control

Enable cruise, call the 71 preset position

The preset position stays for 4 seconds when cruising

Call preset number 75

The preset position stays for 8 seconds when cruising

Call preset number 76

The preset position stays for 10 seconds when cruising

Call preset number 77

The preset position stays for 15 seconds when cruising

Call preset number 78

The preset position stays for 20 seconds when cruising

Call preset number 79


3.Point Scan

Set point A, turn the pan/tilt to the corresponding position, and set preset position 91.

Set point B, turn the pan/tilt to the corresponding position, and set the preset position 92.

Automatic scanning:call the 93 preset position, the pan/tilt rotates between the set A and B points.

Stop:call the 94 preset position.


4.Enable AF(Auto Focus,Default): Call preset number 62

  Enable MF(Manual Focus): Call preset number 63

  Enable KF:Call preset number 64

  KF Mode:The camera only focus on screen for one time when the camera moves to a place;you need use KF mode if you enable auto tracking.



5.Enbale auto tracking:Call preset number 80

   Disable auto tracking:Call preset number 81

   You need use KF mode if you enable auto tracking.



6.Infrared light control

Call the preset position of 88, and the infrared light is in the open mode. At this time, the infrared light is turned on, and the image is turned into black and white mode;

Call the preset position of 89, the infrared light is in the off mode, at this time the infrared light is turned off, and the image is switched to the color mode;

Call the preset position of 90 , the infrared light is in the automatic mode, the infrared light is automatically turned off during the day, the infrared light is automatically turned on at night, the corresponding image is in color when the infrared light is off, and the black light is in black and white when the infrared light is on.



7.Delete all presets: Call 60 command


8.Factory Reset:        Call 96 command


9.Camera lens reset:  Call 253 command 


10.Horizontal scan:  Call 99 command